Side-by-Side
Alex Fast Dry Acrylic Latex Caulk Plus Silicone vs Silicone 1 Tub & Tile Sealant
Compare cure times, application limits, and real-conditions performance for DAP's Alex Fast Dry Acrylic Latex Caulk Plus Silicone and GE's Silicone 1 Tub & Tile Sealant. Adjust the sliders below for your actual temperature and humidity.
SpecificationPlus SiliconeTile Sealant
ManufacturerDAPGE
Full cure (lab)24h24h
Open time★5 min10 min
Dry to touch30 min30 min
Min application temp40°F★32°F
Max application temp100°F★120°F
Safety flagsNoneSkinning risk
Compare at Your Conditions
Which should you choose for cure time?
- - Both products list the same baseline full cure time of 24h, so temperature and humidity may be the deciding factors.
- - Silicone 1 Tub & Tile Sealant allows the lower minimum application temperature (32°F).
- - Silicone 1 Tub & Tile Sealant gives more working time before assembly pressure or tooling becomes urgent.
- - Deep silicone beads need extra full-cure margin even after the surface skins.
Alex Fast Dry Acrylic Latex Caulk Plus Silicone has a 24h full cure time with a 5-minute open time.
Silicone 1 Tub & Tile Sealant has a 24h full cure time with a 10-minute open time.
These products serve different purposes — check each product's individual page for full substrate compatibility details before deciding.
Browse related product categories
Alex Fast Dry Acrylic Latex Caulk Plus Silicone data from manufacturer TDS · last verified Jun 2026.
Silicone 1 Tub & Tile Sealant data from manufacturer TDS · last verified Jun 2026.
Important: Results are estimates only. Always follow manufacturer instructions. Not suitable for structural, load-bearing, or safety-critical applications.