Side-by-Side
Alex Plus Acrylic Latex Caulk Plus Silicone vs Silicone 1 Tub & Tile Sealant
Compare cure times, application limits, and real-conditions performance for DAP's Alex Plus Acrylic Latex Caulk Plus Silicone and GE's Silicone 1 Tub & Tile Sealant. Adjust the sliders below for your actual temperature and humidity.
SpecificationPlus SiliconeTile Sealant
ManufacturerDAPGE
Full cure (lab)24h24h
Open time10 min10 min
Dry to touch30 min30 min
Min application temp40°F★32°F
Max application temp100°F★120°F
Safety flagsNoneSkinning risk
Compare at Your Conditions
Which should you choose for cure time?
- - Both products list the same baseline full cure time of 24h, so temperature and humidity may be the deciding factors.
- - Silicone 1 Tub & Tile Sealant allows the lower minimum application temperature (32°F).
- - Deep silicone beads need extra full-cure margin even after the surface skins.
Alex Plus Acrylic Latex Caulk Plus Silicone has a 24h full cure time with a 10-minute open time.
Silicone 1 Tub & Tile Sealant has a 24h full cure time with a 10-minute open time.
These products serve different purposes — check each product's individual page for full substrate compatibility details before deciding.
Browse related product categories
Alex Plus Acrylic Latex Caulk Plus Silicone data from manufacturer TDS · last verified May 2026.
Silicone 1 Tub & Tile Sealant data from manufacturer TDS · last verified Jun 2026.
Important: Results are estimates only. Always follow manufacturer instructions. Not suitable for structural, load-bearing, or safety-critical applications.