Side-by-Side
Power Grab Ultimate Construction Adhesive vs PC-7 Paste Epoxy
Compare cure times, application limits, and real-conditions performance for Loctite's Power Grab Ultimate Construction Adhesive and PC Products's PC-7 Paste Epoxy. Adjust the sliders below for your actual temperature and humidity.
SpecificationConstruction AdhesivePaste Epoxy
ManufacturerLoctitePC Products
Full cure (lab)48h48h
Open time★10 min60 min
Dry to touch—160 min
Min application temp41°F★35°F
Max application temp104°F★115°F
Safety flagsNoneAmine blush
Compare at Your Conditions
Which should you choose for cure time?
- - Both products list the same baseline full cure time of 48h, so temperature and humidity may be the deciding factors.
- - PC-7 Paste Epoxy allows the lower minimum application temperature (35°F).
- - PC-7 Paste Epoxy gives more working time before assembly pressure or tooling becomes urgent.
- - Watch for amine blush risk in humid epoxy work.
Power Grab Ultimate Construction Adhesive has a 48h full cure time with a 10-minute open time.
PC-7 Paste Epoxy has a 48h full cure time with a 60-minute open time. Watch for amine blush in humid conditions.
These products serve different purposes — check each product's individual page for full substrate compatibility details before deciding.
Browse related product categories
Power Grab Ultimate Construction Adhesive data from manufacturer TDS · last verified Jun 2026.
PC-7 Paste Epoxy data from manufacturer TDS · last verified Jun 2026.
Important: Results are estimates only. Always follow manufacturer instructions. Not suitable for structural, load-bearing, or safety-critical applications.