Sikaflex Construction Sealant
Sika · polyurethane
Full cure (70°F / 50% RH)
168h
Min application temp
40°F
Max application temp
100°F
Open time
30 min
Dry to touch
360 min
Estimate Cure Time
Common use-case guides
When this estimate may be unsafe
- - The joint, bead, pour, or repair is thicker than the product data sheet assumes.
- - The substrate is colder than the surrounding air, wet, oily, dusty, painted, or otherwise poorly prepared.
- - The repair will carry weight, resist water pressure, or be safety-critical before full cure.
Compare with similar products
Quick answers
How long does Sikaflex Construction Sealant take to cure?
Sikaflex Construction Sealant fully cures in 168 hours at standard laboratory conditions, usually 70°F / 21°C and 50% relative humidity. At colder temperatures or difficult humidity, cure time can increase significantly.
What is the minimum temperature to use Sikaflex Construction Sealant?
The minimum application temperature for Sikaflex Construction Sealant is 40°F (4°C). Applying below this threshold can prevent proper curing and cause the bond or seal to fail.
How long does Sikaflex Construction Sealant take to cure in cold weather?
Cold temperatures significantly extend cure time. As a rule of thumb, every 18°F (10°C) below 70°F can roughly double cure time. Enter your actual temperature in the calculator for a product-specific estimate.
Does humidity affect Sikaflex Construction Sealant cure time?
Yes. Sikaflex Construction Sealant needs atmospheric moisture to trigger its cure reaction. Below 30% RH curing will stall. Above 80% RH premature surface skinning can prevent interior cure. Optimal range is 40-70% RH.
What is the open time for Sikaflex Construction Sealant?
Sikaflex Construction Sealant has a working open time of 30 minutes at standard conditions. At higher temperatures open time may shorten; at lower temperatures cure may slow after assembly.