Side-by-Side
PL 375 Heavy Duty Construction Adhesive vs PC-7 Paste Epoxy
Compare cure times, application limits, and real-conditions performance for Loctite's PL 375 Heavy Duty Construction Adhesive and PC Products's PC-7 Paste Epoxy. Adjust the sliders below for your actual temperature and humidity.
SpecificationConstruction AdhesivePaste Epoxy
ManufacturerLoctitePC Products
Full cure (lab)48h48h
Open time60 min60 min
Dry to touch—160 min
Min application temp40°F★35°F
Max application temp100°F★115°F
Safety flagsNoneAmine blush
Compare at Your Conditions
Which should you choose for cure time?
- - Both products list the same baseline full cure time of 48h, so temperature and humidity may be the deciding factors.
- - PC-7 Paste Epoxy allows the lower minimum application temperature (35°F).
- - Watch for amine blush risk in humid epoxy work.
PL 375 Heavy Duty Construction Adhesive has a 48h full cure time with a 60-minute open time.
PC-7 Paste Epoxy has a 48h full cure time with a 60-minute open time. Watch for amine blush in humid conditions.
These products serve different purposes — check each product's individual page for full substrate compatibility details before deciding.
Browse related product categories
PL 375 Heavy Duty Construction Adhesive data from manufacturer TDS · last verified May 2026.
PC-7 Paste Epoxy data from manufacturer TDS · last verified Jun 2026.
Important: Results are estimates only. Always follow manufacturer instructions. Not suitable for structural, load-bearing, or safety-critical applications.