Side-by-Side
Titebond White Glue vs PC-7 Paste Epoxy
Compare cure times, application limits, and real-conditions performance for Franklin International's Titebond White Glue and PC Products's PC-7 Paste Epoxy. Adjust the sliders below for your actual temperature and humidity.
SpecificationWhite GluePaste Epoxy
ManufacturerFranklin InternationalPC Products
Full cure (lab)★24h48h
Open time★5 min60 min
Clamp / tack time30 min—
Dry to touch—160 min
Min application temp50°F★35°F
Max application temp—115°F
Safety flagsNoneAmine blush
Compare at Your Conditions
Which should you choose for cure time?
- - Titebond White Glue has the faster baseline full cure (24h vs 48h).
- - PC-7 Paste Epoxy allows the lower minimum application temperature (35°F).
- - PC-7 Paste Epoxy gives more working time before assembly pressure or tooling becomes urgent.
- - Watch for amine blush risk in humid epoxy work.
Titebond White Glue has a 24h full cure time with a 5-minute open time.
PC-7 Paste Epoxy has a 48h full cure time with a 60-minute open time. Watch for amine blush in humid conditions.
These products serve different purposes — check each product's individual page for full substrate compatibility details before deciding.
Browse related product categories
Titebond White Glue data from manufacturer TDS · last verified Jun 2026.
PC-7 Paste Epoxy data from manufacturer TDS · last verified Jun 2026.
Important: Results are estimates only. Always follow manufacturer instructions. Not suitable for structural, load-bearing, or safety-critical applications.