How long does Titebond Instant Bond Medium Jet Black take to cure on Metal (Steel / Aluminium)?

Titebond Instant Bond Medium Jet Black takes 8 hours to fully cure on Metal (Steel / Aluminium) at 70°F and 50% RH. Temperature and humidity significantly affect this — use the calculator on this page for an adjusted estimate at your actual conditions.

How do I prepare Metal (Steel / Aluminium) before applying Titebond Instant Bond Medium Jet Black?

Degrease with isopropyl alcohol or acetone immediately before bonding — oils from handling prevent adhesion. Abrade the bonding surface with 80-grit sandpaper for maximum bite.

Construction Adhesive

Titebond Instant Bond Medium Jet Black on Metal (Steel / Aluminium)

Franklin International · Construction Adhesive

Ferrous and non-ferrous metal surfaces. Use the calculator below to get a cure-time estimate adjusted for your actual temperature and humidity, then follow the surface-prep checklist.

Full cure (70°F / 50% RH)

Min application temp

50°F

Open / working time

1 min

Clamp / tack time

1 min

Estimate Cure Time

Surface Prep — Metal (Steel / Aluminium)

1Degrease with isopropyl alcohol or acetone immediately before bonding — oils from handling prevent adhesion.
2Abrade the bonding surface with 80-grit sandpaper for maximum bite.
3Aluminium develops an oxide layer rapidly — sand and bond within 30 minutes.
4Avoid bonding galvanised steel with construction adhesives unless the adhesive specifically supports it.

Titebond Instant Bond Medium Jet Black on other surfaces

on Glass on Ceramic / Porcelain Tile on Plastic (ABS / Polypropylene)on Natural Stone

← Back to Titebond Instant Bond Medium Jet Black full page

Data sourced from manufacturer's Technical Data Sheet. Last verified: June 2026.

Important: Results are estimates only. Always follow manufacturer instructions. Not suitable for structural, load-bearing, or safety-critical applications.