How long does Titebond Instant Bond Medium Jet Black take to cure on Natural Stone?

Titebond Instant Bond Medium Jet Black takes 8 hours to fully cure on Natural Stone at 70°F and 50% RH. Temperature and humidity significantly affect this — use the calculator on this page for an adjusted estimate at your actual conditions.

How do I prepare Natural Stone before applying Titebond Instant Bond Medium Jet Black?

Non-porous stones (granite, basalt) need mechanical abrasion — sand with 60-grit before bonding. Porous stones (limestone, sandstone) absorb adhesive — prime with a stone consolidant first.

Construction Adhesive

Titebond Instant Bond Medium Jet Black on Natural Stone

Franklin International · Construction Adhesive

Granite, marble, slate, or limestone. Use the calculator below to get a cure-time estimate adjusted for your actual temperature and humidity, then follow the surface-prep checklist.

Full cure (70°F / 50% RH)

Min application temp

50°F

Open / working time

1 min

Clamp / tack time

1 min

Estimate Cure Time

Surface Prep — Natural Stone

1Non-porous stones (granite, basalt) need mechanical abrasion — sand with 60-grit before bonding.
2Porous stones (limestone, sandstone) absorb adhesive — prime with a stone consolidant first.
3Marble is sensitive to acid — use only pH-neutral cleaners, never acid-based products.
4Slate delaminates along its cleavage planes — mechanical fasteners alongside adhesive are recommended.

Titebond Instant Bond Medium Jet Black on other surfaces

on Metal (Steel / Aluminium)on Glass on Ceramic / Porcelain Tile on Plastic (ABS / Polypropylene)

← Back to Titebond Instant Bond Medium Jet Black full page

Data sourced from manufacturer's Technical Data Sheet. Last verified: June 2026.

Important: Results are estimates only. Always follow manufacturer instructions. Not suitable for structural, load-bearing, or safety-critical applications.